Recent content by pomranky

Interesting thought! We haven't tried that but let us know if it works and if there are any conflicts!

Sure, here you go: Shelf: Length: 500mm (19-5/8") Width: 275mm (10-3/4") Height: 275mm (10-3/4") I believe you are referring to the top section above the wheel? Width: 200mm (7-7/8") Length: 559mm (22") I'm not sure of the shelf weight capacity. However, Richard has put two massive coolers on...

Hmmm...this is a good question. Currently (for the axle-mount version) the modeling software shows the center of mass directly at the pivot point of the swingarm. On the frame mount version, the center of mass is 2.5" towards the rear (center-to-center) of the swingarm pivot. However, for each...

It seems like this connects to a CANopener. There's not a CAN system on the trailer (it connects to the bikes CANsmart) so most likely, another set of wires would need to be run to the front of the trailer to a CAN system. The other option would be to wire everything individually into the...

Excellent ideas Jim! Yes, this would make a very expensive wheelbarrow. I like the ideas of the fold out handles. I already have a design for locking the trap hinge for maneuvering around without a bike but it needs to be updated. A mini billboard would be fairly easy to create as well. Tony, I...