Recent content by roddesu

So cool! Thank you for sharing. That was a lot of fun to watch!

What an amazing write up!! Thank you for sharing all of this. And it was really great to get to "re-meet" you when I was a bit less frantic (as opposed to last year's MOA). I'll be sharing this with some people!!

😆

No...Luke and I spent about 5 or 6 hours yesterday doing that. And I can say very confidently I dislike M5 and M4 screws! I also don't like that we us M6 flatheads that are 22mm long and others that are 20mm. Sorting them is not fun.

Here is a graphic I made for some social media posts:

Yep, lots of openness there! I think the most open road, with almost no gravel roads off of it, no buildings for dozens and dozens of miles, no anything was on hwy 78 between Burns, Washington to the intersection of hwy 78 and hwy 95 (map).

We have started to receive the parts for our first production run of ADV1s. On Tuesday Luke and I spent a half hour unboxing and unbagging all the hardware needed and dumping them into heavy-guage boxes. They looked something like this: Next we took them to a specialty plater on the south...

Sounds like you suffer from the age-old problem of "knowing too much!" My son (also making his living in the IT world) suffers from that as well.

We'll see if we can track down the unit and see if there is any possibility of working together!

I am at a conference in a Chicago western suburb until Friday afternoon. I could just continue on from the conference and get there about 7 or 8 on Friday evening. In your experience, would I be missing "the best stuff?" Do they have vendor area? I kind of doubt it, but just checking. It would...

This magically appeared in my video feed, where Tom says his brother Jim did a lot of the running in Forrest Gump and they resember each other quite a bit.

I downloaded it to my computer, which is a Mac, and then opened it in Preview, which lets you rotate pictures, saved it, and then uploaded it back to the forum. It took me longer to type that than to actually do it! :) Can anyone with a PC give similar instructions?

FANTASTIC!

Rotated

Very close. That is Tom's brother, Jimmy. Jimmy rides an Africa Twin and spent some time time hanging out with us last year at MOA and Touratech, and dropped by a time or two this year as well. Good guy who puts a lot of miles on his bike every year. Jimmy looks about 95% the same as Tom—so much...