All Cleaned up!!!!

Gunhog6

Beta Tester
All cleaned up waxed, and ready for the next big adventure. Turrettech rally was fun, did 1500 plus miles towing. The trailer, I also did a bunch of rides without the trailer. That's what's great about it. You can disconnect it and ride your bike independently.Leave it at the camp which is exactly what I did.....
 

Attachments

  • 20250630_140543.webp
    20250630_140543.webp
    1.4 MB · Views: 30
  • 20250627_141025.webp
    20250627_141025.webp
    3 MB · Views: 25
  • 20250625_101349.webp
    20250625_101349.webp
    2.2 MB · Views: 27
73#, but I didn't weigh the cooler with ice, pop, and water, that was probably an additional 25#. On way home the cooler was empty....only dirty cloths and a couple pops left over. Handled differently but not too much different. Btw the 75# included the panniers cuz ILoaded the and weighed them to get even weight as much as possible
 
Clark, it was great to spend time with you at Touratech! Thanks for stopping by and hanging out with us!

Did everyone note the kickstands Clark welded to the side of the hitch? One on each side. It's a pretty good solution!
 
Awesome seeing u guys too, hope you sold a shitload. Sorry tony got sick.....bummer. he shouldn't have eaten those breakfast burritis....or added way more hot sauce.
 
Could you write up the BoM for that? Pipe diameter, lengths, etc? I'm still waiting for my ADV1 to arrive and want to have as much as possible ready for installation/build as possible. Thanks in advance for your help!!
 
Btw, I set up a couple tables in my shop , played most parts on one and assembled on the other with trailer upside down, way easier with the trailer at waist level vs working on the floor..... put another pice of card board on table to keep from scratching up the top of the trailer.....
 

Attachments

  • 20241029_132837.webp
    20241029_132837.webp
    1.1 MB · Views: 7
  • 20241030_105215.webp
    20241030_105215.webp
    1.3 MB · Views: 9
  • 20241030_105857.webp
    20241030_105857.webp
    729.4 KB · Views: 9
Btw, I set up a couple tables in my shop , played most parts on one and assembled on the other with trailer upside down, way easier with the trailer at waist level vs working on the floor..... put another pice of card board on table to keep from scratching up the top of the trailer.....
 

Attachments

  • 20241031_182636.webp
    20241031_182636.webp
    1.6 MB · Views: 7
Back
Top