PowerWerks Megabox fitment?

Just to be clear @PBKrarup if that 7+ ever shakes loose, I'm finding your-over-prepared-ass :p
Dimensions look good, but I'm not seeing weight on the specs of the box?
Also not sure how BMW CANBUS nonsense gets heavy gauge power to charge/recharge such a thing. Luke's wiring is brill for most things, but heavy amperage would require dedicated circuits, I think.
 
Tony D. said:
Just to be clear @PBKrarup if that 7+ ever shakes loose, I'm finding your-over-prepared-ass :p
Dimensions look good, but I'm not seeing weight on the specs of the box?
Also not sure how BMW CANBUS nonsense gets heavy gauge power to charge/recharge such a thing. Luke's wiring is brill for most things, but heavy amperage would require dedicated circuits, I think.
Click to expand...
Dr Glenn & Billy of Clearwater Lights were at the 49er Rally and I informed them that I'd be visiting when I got my ADV1 to seek their assistance in wiring the Mini Billie, my ham radio, and a battery (& maybe a hibachi grill & sous-vide station) to it.

Regarding the weight of the box, it's an "empty" shell and can hold a variety of batteries depending on needs, and the extra space inside is for cables, electrical tape, fuses, etc., etc., etc...

I don't push the envelope, I beat it into submission... 🤣🤣🤣🤣
 
Here are some dimensions you may want to consider IF you are thinking about putting a battery in the internal storage area:
  • Internal dimensions are:
    • 7.6" wide
    • 12" long (at the bottom)
    • 15" long at the top
  • The opening is:
    • 6" wide
    • 15" long
Hope this helps!
 
roddesu said:
Here are some dimensions you may want to consider IF you are thinking about putting a battery in the internal storage area:
  • Internal dimensions are:
    • 7.6" wide
    • 12" long (at the bottom)
    • 15" long at the top
  • The opening is:
    • 6" wide
    • 15" long
Hope this helps!
Click to expand...

I'm a very visual person, could you drop an engineering drawing in this thread? ;-)
 
I've contacted PowerWerks and given them the dimensions, asking them to check if the box would fit. Otherwise, I'd have to buy it and see if it fits and then deal with returning it if it didn't. Oh, well, such is life. Get lemons, turn into margaritas. ;-)
 
PBKrarup said:
Dr Glenn & Billy of Clearwater Lights were at the 49er Rally and I informed them that I'd be visiting when I got my ADV1 to seek their assistance in wiring the Mini Billie, my ham radio, and a battery (& maybe a hibachi grill & sous-vide station) to it.

Regarding the weight of the box, it's an "empty" shell and can hold a variety of batteries depending on needs, and the extra space inside is for cables, electrical tape, fuses, etc., etc., etc...

I don't push the envelope, I beat it into submission... 🤣🤣🤣🤣
Click to expand...
Had no idea Clearwater was so close! I wonder if they have a scratch-&-dent box I could poke thru...
 
You must log in or register to reply here.
Back
Top