Post Questions Here...Or Post a New Thread! ➚

Tony D. said:
Welcome Jim!
PASQ indeed does have a brilliantly engineered fold down shelf. Got mine mounted yesterday :) I'm going for a little ride this weekend I'll let you know how it goes. I have to find a cooler or a way to secure a couple bear cannisters, just had to wait for the shelf to arrive...
Click to expand...

What kind of bear would fit into a canister? Willingly, anyway. :D
 
Hi, Rod!

In addition to the tail lights, I'd like to get the Clearwater Lights Billie Jr installed at the back of the ADV1. I'll buy it & send it to you when needed. It hooks into most/all of the CANBUS doodads and (hopefully) picks up the programming of my bike-mounted Billie Jr.

There's a "mini-Billie" that doesn't have the license-plate screw-holes but it attaches via double-sided tape and I'd rather avoid that potential failure point.

The unit is approximately 2" high, if that helps.

The online manual for the Billie is here - https://cdn.shopify.com/s/files/1/0...-ee06-4558-bf0e-a0cbf4b2171a.pdf?v=1635289164
 

Attachments

  • Billie Jr dimensions.webp
    Billie Jr dimensions.webp
    7.8 KB · Views: 5
It seems like this connects to a CANopener. There's not a CAN system on the trailer (it connects to the bikes CANsmart) so most likely, another set of wires would need to be run to the front of the trailer to a CAN system. The other option would be to wire everything individually into the existing wires at the back. This is probably the better option but will be fairly involved.
 
If need be, I can bring the whole kit & kaboodle up to Clearwater Lights when I get the ADV and let them figure out the wiring.

I'm sure they'd be happy to figure it out and see the ADV1 so they can advertise their solution.
 
I'm excited to talk with Clearwater at the upcoming shows. I've never spoken with them, but at least two of our Beta Testers use the CANopener and love it. I know one of the beta testers daisy chained a CANopener and a Denali CANsmart with no problems at all.
 
roddesu said:
I'm excited to talk with Clearwater at the upcoming shows. I've never spoken with them, but at least two of our Beta Testers use the CANopener and love it. I know one of the beta testers daisy chained a CANopener and a Denali CANsmart with no problems at all.
Click to expand...
Pics & writeup, stat!! ;-)

FWIW, my birthday is 1 August so if a large package shows up on my doorstep close to that date, I'll be very happy.
 
pomranky said:
It seems like this connects to a CANopener. There's not a CAN system on the trailer (it connects to the bikes CANsmart) so most likely, another set of wires would need to be run to the front of the trailer to a CAN system. The other option would be to wire everything individually into the existing wires at the back. This is probably the better option but will be fairly involved.
Click to expand...

Indeed, the Billie does connect to the Clearwater Lights' CANopener and per Billy at Clearwater, "The wire can be as long as 120 inches and you still be fine for the Billie brake light."

Therefore I assume that the wire from the Billie can run from the light all the way through the ADV1 wiring harness to the CANopener on the bike.

Hopefully, that will also allow my ham radio's power lines, CAT5 signal lines, and antenna cable to also share that wiring access, however that ends up. I'll try to avoid a rat's nest of spaghetti wiring!!

Adventures in configurations!! :D
 
You must log in or register to reply here.
Back
Top